If your 2011 Yukon XL already has the tow package you're well equipped to tow a Forest River E-Pro 19FD with a 600-lbs tongue weight. It sounds like you might be in need of a weight distribution system to help keep the rear end from sagging too much and creating poor handling conditions that could end up being dangerous. You'll want to choose your weight distribution hitch based off the trailer's tongue weight and you'll want the tongue weight to fall somewhere towards the middle of the... view full answer...
I may have a solution for you to cover the 3,200-Watt Portable RV Inverter Generator - 2,900 Running Watts - Gas - Remote Start # 333-0003, but there is not a cover specifically designed for this model. However, you can use the Storage Cover for etrailer 4,500-Watt Generator - Weather Resistant # 333-0008 and it will do a fine job- it's just a little bit larger than the 3800-Watt generator, so there will be some excess.
This would be the best available solution we have for this particular... view full answer...
In order to switch to a 5 on 4-1/2 bolt pattern you are going to need a new hub and drum assembly. In order to select the correct one, you will need to figure out your axle capacity and what bearings fit your spindle.
Assuming your trailer has a 3,500 lb axle using the # L68149 inner and # L44649 outer bearing, you would be looking at the # 84546UC3 of if you have E-Z lube axles the # AKHD-545-35-EZ-K instead.
I recommend pulling off your current hub and drum assembly and looking at... view full answer...
The Adco Polypropylene Storage Lot RV Cover for Travel Trailer # 290-74839 will fit your 2019 Forest River Flagstaff E-Pro Travel Trailer just fine.
This cover is intended to fit trailers up to 217" long (18') so there will be enough room to cover your ladder as well.
Additionally, this cover is made from heavy-duty, UV-treated 4-layer polypropylene fabric that will prevent fading and cracking, and eliminates black streaks and corrosion. view full answer...
Go To Results